Pages

Oct 28, 2011

How to make a Jack in the Box head costume

For this year's Halloween I decided to make a Jack in the Box head, the same one from the TV commercials. Before I did this I looked everywhere online trying to find a decent set of instructions. I found three things: 1) the instructions were bad, 2) the head was ugly, or 3) the head was good but they were more interested in selling you a head than telling you how to make it. These are the instructions I wish I had.

Materials you need (and links to where I bought mine):

1. 16 inch diameter styrofoam ball. Mine came in two hollow halves which made it very convenient. http://www.plasteelcorp.com/
2. Craft foam. Definitely need red, blue, and black. Get yellow if making hat. http://shop.hobbylobby.com/crafts/craft-foam/
3. Plastic mesh. Get the one with the biggest holes. I think this was called "7 mesh"? http://www.everythingplasticcanvas.com/default.aspx
4. Padding foam, like something that would go in a sofa cushion. I got a large piece at a local foam store for 75 cents.

Tools:

1. Scissors.
2. Paper. You should make everything out of paper before using the real stuff.
3. Serrated knife. I used a kitchen steak knife type thing.
4. Glue. I used a hot glue gun. Other glue might be ok.
5. Scotch tape and masking tape or other "wide" tape.
6. Pens, markers, pencils. Helps you draw your shapes before cutting.

Steps:

1. Put the two halves together to form the sphere. Tape this with maybe 8 pieces of scotch tape. I originally did this as a temporary hold with intentions to glue it together later, but I just stayed with it. Looks fine.

2. Cut out a hole to fit your head in. You'll want to have the head's face on one of the half sphere's, not along the seam. Cut accordingly. My opening was about 8.5 inches in diameter.





3. Cut circles out of paper that are the size you want the eyes. My eyes are 3.5 inches in diameter. Cut some more paper in the shape of the mouth. Color these, then tape them to your head. Make whatever adjustments here.

4. Remove the eye circles, and cut out holes in their place. You want your hole to be smaller than the full size of the eye, so that the eye can be glued on the head. For example, if your eye is 3.5 inches in diameter, make the hole around 2.5 inches in diameter.

5. Cut your mesh into circles that will fit over the eye holes. These should also be less than total the size of the eye, but more than the hole. Try 3 inches diameter.

6. Glue the mesh over the eye holes.

7. Cut the full eye-sized circles out of blue craft foam. For the inner circle that you will cut out, I used a razor blade. Exacto knife, something like that will work. Using scissors for the inside will probably not cut cleanly.

8. Glue the eyes over the mesh.

9. Cut the mouth out of red craft foam, put it on head. I found a sticky-backed craft foam in red, so after cutting it, I was able to just easily stick it on the head. No glue required. It also seems like it can be easily removed to be replaced with other mouth shapes. Go wild.

10. For the nose, I made a cone out of black craft foam. I found a great tutorial on making cones here: http://www.firstpalette.com/tool_box/quick_how_to/Cone_Hat/Cone_Hat.html . Basically, cut something between a half circle and quarter circle, then form the cone. Do this with paper first to get a feel for it. I went with something like a 3/8th circle.

11. Form the cone for the nose. Tape this together with a few pieces of tape. Then remove the tape one by one, gluing the thing together. After it is dry, glue nose to head.

12. For the inside, I lined blocks of padding foam in the back, top, and two sides. I taped them all with masking tape.

You're done! If you want to make a hat, you can do this by making a big yellow cone, then a long rectangular base thing for the bottom of the hat. Look at some pictures, you'll figure it out.

I would greatly appreciate any feedback on this. Send me some pictures when you're done, I'd love to see your masterpiece!



14 comments:

  1. I want to make one! Thanks for the tutorial

    ReplyDelete
  2. 5 years later....thank you for this!

    ReplyDelete
  3. Anybody able to find a 16" diameter ball? I can only find 12" :/

    ReplyDelete
    Replies
    1. 1000 bulbs dot com sells globes for about $40(incl. shipping) made of acrylic plastic. working on my jack box head now

      Delete
    2. 1000 bulbs dot com sells globes for about $40(incl. shipping) made of acrylic plastic. working on my jack box head now

      Delete
    3. What did you.end up doing Anthony bc his site doesn't work anymore

      Delete
    4. I've been browsing like crazy and 12" is all I can find. I emailed a few companies to see if they can make 16" ones still and what the pricing on them would be.

      Delete
    5. Plasteel now sells a 15 inch diameter ball that is hollow and comes in 2 halves....here is the link

      https://www.smoothfoam.com/product/10073_7.html

      Delete
  4. Just wanna say thank you. I was trying to buy one online, they are all 100 dollars. This is WAY better

    ReplyDelete
  5. Can you make custome costume heads for sale?

    ReplyDelete
  6. How Can you breathe in the head?

    ReplyDelete